Admission Requirements
- Students wanting to declare a major in an engineering discipline must be in good academic standing and must have a "C" (2.0) or better in each of the following courses or their equivalents: MAC 2311C, MAC 2312, PHY 2048C, and CHM 2045C.
- Students wanting to declare a major in an engineering discipline must complete a change of major in the term of completion of the final pending prerequisite course(s) listed above.
Degree Requirements (128 Credit Hours)
- The College of Engineering & Computer Science requires all engineering students to achieve a minimum 2.25 GPA in completing the courses from section Basic Core Requirements, section Advanced Core Requirements, section Restricted Electives and section Capstone Requirements listed below. Independent study courses generally do not satisfy major requirements.
- A "C" (2.0) or better is required in each pre-requisite course in section Common Program Prerequisites, section Advanced Core Requirements, and section Capstone Requirements.
- Students in the Environmental Engineering major are expected to make consistent good progress toward their degrees to remain enrolled in, or eligible for, any major in the College of Engineering & Computer Science (CECS) or the College of Optics and Photonics (COP). Therefore, any student majoring in Environmental Engineering who repeats any UCF course and does not earn a grade of "C" (2.0) or better on the second attempt will be placed on Lack of Progress Probation and remain on Lack of Progress Probation as long as the student is enrolled in a CECS or COP major. If a student on Lack of Progress Probation does not receive a grade of "C" (2.0) or better by the third attempt in the same UCF course, the student will be excluded from all CECS and COP majors. Any student majoring in Environmental Engineering who has accumulated 7 or more unsuccessful attempts (i.e., grades below "C" (2.0) and withdrawals) over all courses taken at UCF will be placed on Lack of Progress Probation and remain on Lack of Progress Probation as long as the student is enrolled in a CECS or COP major. If a student on Lack of Progress Probation has a tenth unsuccessful attempt over all courses taken at UCF, the student will be excluded from all CECS and COP majors.
- A student who is excluded from CECS and COP majors may seek readmission to a major in CECS or COP after at least one full year has passed since exclusion. Readmission is not automatic and is dependent upon a high probability of success after readmission. Any student who is readmitted to the Environmental Engineering major will be subject to all probation conditions that applied at the time of exclusion.
This program has potential ties to professional licensure or certification in the field. For more information on how this program may prepare you in that regard, please view the 辫谤辞驳谤补尘.鈥�
Degree Requirements
Core Requirements: Basic Level
9 Total Credits
- Complete all of the following
- Environmental engineering majors must complete both Earth Science and Biological Science coursework. See assigned academic advisor for list of approved courses.
- Earn at least 9 credits from the following:
- EGS1006C - Introduction to the Engineering Profession (1)
- EGN1007C - Engineering Concepts and Methods (1)
- CHM2045C - Chemistry Fundamentals I (4)
- CHM2046 - Chemistry Fundamentals II (3)
- CHM2046L - Chemistry Fundamentals Laboratory (1)
- Earth Science Credit Hours: 3 (GEP)
- Biological Science Credit Hours: 3
- CPP Course: CHM 2045C
- A "C" (2.0) or better is required in this course: CHM 2045C, CHM 2046
Core Requirements: Advanced Level
53 Total Credits
- Complete all of the following
- Earn at least 50 credits from the following:
- EGN3310 - Engineering Analysis-Statics (3)
- EGN3321 - Engineering Analysis-Dynamics (3)
- EGN3331C - Mechanics of Materials (3)
- EGN3343 - Thermodynamics (3)
- EGN3613 - Engineering Economic Analysis (2)
- ENV3001 - Environmental Engineering (3)
- CCE4003 - Introduction to the Construction Industry (3)
- STA3032 - Probability and Statistics for Engineers (3)
- CWR3201 - Engineering Fluid Mechanics (3)
- CEG4011C - Geotechnical Engineering I (4)
- EES4111C - Biological Process Control (4)
- EES4202C - Chemical Process Control (4)
- ENV4531 - Environmental Engineering Unit Operations & Processes (3)
- ENV4120 - Air Pollution and Hazardous Waste Control (3)
- ENV4561 - Advanced Environmental Engineering Operations & Processes (3)
- ENV4341 - Sustainable Resource Management (3)
- CWR4202C - Hydraulics (3)
- GEP Course: STA 3032
- A "C" (2.0) or better is required in this course: EGN 3310, EGN 3331C, EGN 3343, EGN 3613, ENV 3001, CWR 3201, ENV 4531, CWR 4202C
- Complete at least 1 of the following:
- CWR4120 - Hydrology (3)
- CWR4124 - Hydrogeology (3)
Restricted Electives
3 Total Credits
- Earn at least 3 credits from the following types of courses: Technical electives are available in the BSEnvE program to address specific student interests in a variety of technical areas. Students should consult with their assigned academic advisor for a list of the approved technical electives and the terms when specific courses of this type are to be offered.
Capstone Requirements
6 Total Credits
- Required Senior Design Courses
Environmental Engineering Design Specialization
3 Total Credits
- Complete all of the following
- A "C" (2.0) or better is required in these courses. Choose one course from the following:
- Complete at least 1 of the following:
- ENV4433C - Environmental Engineering Wastewater Design (3)
- ENV4122C - Air Pollution Control Design (3)
- ENV4562C - Environmental Engineering Water Treatment Design (3)
Capstone Course
3 Total Credits
- Complete the following:
- CGN4808C - CECE Capstone Design (3)
Grand Total Credits: 71
Environmental Engineering Design Specialization (3 Credit Hours)
1 A "C" (2.0) or better is required in this course. Choose one course from the following:
- ENV 4433C - Environmental Engineering Wastewater Design Credit Hours: 3 1
- ENV 4122C - Air Pollution Control Design Credit Hours: 3 1
- ENV 4562C - Environmental Engineering Water Treatment Design Credit Hours: 3 1
Capstone Course (3 Credit Hours)
- CGN 4808C - CECE Capstone Design Credit Hours: 3
Electives
Foreign Language Requirements
Admissions
- Two years of one foreign language in high school, or one year of one foreign language in college (or equivalent proficiency exam) prior to graduation.
Graduation
Additional Requirements
- EnvE students must take the Fundamentals of Engineering (FE) Exam during their Senior year.
Required Minors
Departmental Exit Requirements
University Minimum Exit Requirements
- A 2.0 UCF GPA
- 42 semester hours of upper division credit completed
- 60 semester hours earned after CLEP awarded
- 30 of the last 39 hours of course work must be completed in residency at UCF.
- A maximum of 45 hours of extension, correspondence, CLEP, Credit by Exam, and Armed Forces credits permitted.
- Complete the General Education Program, the Gordon Rule, and nine hours of Summer credit.
Total Undergraduate Credit Hours Required: 128
Additional Information
Honors In Major
Related Programs
- Chemistry (B.S.)
- Construction Engineering (B.S.Con.E.)
- Civil Engineering (B.S.C.E.)
- Environmental Engineering B.S. to M.S.Env.E.
- Environmental Engineering B.S to M.S
Certificates
- Engineering Leadership Certificate
Related Minors
- Chemistry Minor
- Environmental Studies Minor
- Mathematics Minor
- Engineering Leadership Minor
- Bioengineering Minor
Advising Notes
- Each engineering student is assigned a qualified engineering academic advisor in the department of his/her major. Each student should seek academic advisement before registering for classes each semester to minimize excess hours and to ensure that satisfactory academic progress is being maintained.
- The Environmental Engineering program offers the opportunity for exceptionally well qualified undergraduates to enter directly into the PhD program after completion of an appropriate BS degree. This option allows outstanding undergraduates to begin planning a research program with a specific faculty advisor even before finishing the BS, and may allow completion of the PhD in a shorter time period than by taking a separate Masters followed by the PhD.
Transfer Notes
- Courses transferred must be formally evaluated for equivalency credit. The student must provide all supporting information with his/her petition for this evaluation.
- EGS 1006C and EGN 1007C are required courses for incoming freshmen only. The credits for these two courses (one hour for each) may, with prior approval of the department academic advisor, be moved to the Restricted Elective area.
Acceptable Substitutes for Transfer Courses
Program Academic Learning Compacts
- Program Academic Learning Compacts (student learning outcomes) for undergraduate programs are located at: http://www.oeas.ucf.edu/alc/academic_learning_compacts.htm
Equipment Fees
- Part-Time Student: $44 per term
- Full-Time Student: $87 per term
Plan of Study (128 Credit Hours)
The tentative course schedule listed below is a guide for those students who plan on completing their degree in four years. All engineering students should meet with their departmental academic advisor to develop and maintain an appropriate plan of study.
Freshman Year - Fall (15 Credit Hours)
- ENC 1101 - Composition I Credit Hours: 3
- MAC 2311C - Calculus with Analytic Geometry I Credit Hours: 4
- EGS 1006C - Introduction to the Engineering Profession Credit Hours: 1
- CHM 2045C - Chemistry Fundamentals I Credit Hours: 4
- Biological Science Requirement Credit Hours: 3
Freshman Year - Spring (15 Credit Hours)
- ENC 1102 - Composition II Credit Hours: 3
- MAC 2312 - Calculus with Analytic Geometry II Credit Hours: 4
- PHY 2048C - General Physics Using Calculus I (or PHY2408 and PHY2048L) Credit Hours: 4
- EGN 1007C - Engineering Concepts and Methods Credit Hours: 1
- Earth Science Credit Hours: 3
Freshman Year - Summer (10 Credit Hours)
- MAC 2313 - Calculus with Analytic Geometry III Credit Hours: 4
- EGN 3310 - Engineering Analysis-Statics Credit Hours: 3
- GEP Credit Hours: 3
Sophomore Year - Fall (15 Credit Hours)
- CHM 2046 - Chemistry Fundamentals II Credit Hours: 3
- CHM 2046L - Chemistry Fundamentals Laboratory Credit Hours: 1
- MAP 2302 - Ordinary Differential Equations I Credit Hours: 3
- EGN 3613 - Engineering Economic Analysis Credit Hours: 2
- ENV 3001 - Environmental Engineering Credit Hours: 3
- GEP Credit Hours: 3
Sophomore Year - Spring (16 Credit Hours)
- EGN 3331C - Mechanics of Materials Credit Hours: 3
- PHY 2049C - General Physics Using Calculus II (or PHY2049 and PHY2049L) Credit Hours: 4
- CWR 3201 - Engineering Fluid Mechanics Credit Hours: 3
- GEP Credit Hours: 3
- GEP Credit Hours: 3
Junior Year - Fall (15Credit Hours)
- EGN 3343 - Thermodynamics Credit Hours: 3
- CEG 4011C - Geotechnical Engineering I Credit Hours: 3
- EES 4202C - Chemical Process Control Credit Hours: 4
- CGN 3130 -Engineering Reports & Liability Credit Hours: 2
- GEP Credit Hours: 3
Junior Year - Spring (16 Credit Hours)
- CWR 4202C - Hydraulics Credit Hours; 3
- STA 3032 - Probability and Statistics for Engineers Credit Hours: 3
- ENV 4531 - Environmental Engineering Operations & Processes I Credit Hours: 3
- ENV 4120 - Air Pollution and Hazardous Waste Control Credit Hours: 3
- EES 4111C - Biological Process Control Credit Hours: 4
Senior Year - Fall (14 Credit Hours)
- ENV 4341 - Sustainable Resource Management Credit Hours: 3
- CCE 4003 - Introduction to the Construction Industry Credit Hours: 3
- EES 4053 - Fate/Transport Contaminants in Environment Credit Hours: 2
- Approved Project Design Credit Hours: 3
- Select One: (3 Credit Hours)
- CWR 4120 - Hydrology Credit Hours: 3
- CWR 4124 - Hydrogeology Credity Hours: 3
Senior Year - Spring (12 Credit Hours)
- ENV 4561 - Advanced Environmental Engineering Operations & Processes Credit Hours: 3
- Technical Elective Credit Hours: 3
- GEP Credit Hours: 3
- CGN 4808C - CECE Capstone Design Credit Hours: 3
